 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 6-Channel EMI Filter Array with ESD Protection CSPEMI306A Features * * * * * * Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network Greater than 32dB attenuation at 1GHz +15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) +30kV ESD protection on each channel (HBM) Chip Scale Package features extremely low lead inductance for optimum filter and ESD performance 15-bump, 2.960mm X 1.330mm footprint Chip Scale Package (CSP) Lead-free version available Product Description The CSPEMI306A is a six channel low-pass filter array that reduces EMI/RFI emissions while at the same time providing ESD protection. It is used on data ports on mobile devices. To reduce EMI/RFI emissions, the CSPEMI306A integrates a pi-style filter (C-R-C) for each of the 6 channels. Each high quality filter provides greater than 30dB attenuation in the 800-2700 MHz range. These pi-style filters also support bidirectional filtering, controlling EMI both to and from a data port connector. In addition, the CSPEMI306A provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The input pins safely dissipate ESD strikes of +15kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MILSTD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the device provides protection for contact discharges to greater than +30kV. * * Applications * * * * * * EMI filtering and ESD protection for both data and I/O ports Wireless Handsets Handheld PCs / PDAs MP3 Players Notebooks Desktop PCs The CSPEMI306A is particularly well suited for portable electronics (e.g., cellular telephones, PDAs, notebook computers) because of its small package footprint and low weight. The CSPEMI306A is available in a space-saving, low-profile Chip Scale Package with optional lead-free finishing. (c)2010 SCILLC. All rights reserved. May 2010 Rev. 2 Publication Order Number: CSPEMI306A/D CSPEMI306A Electrical Schematic 1 of 6 EMI/RFI + ESD Channels Lead-free devices are specified by using a "+" character for the top side orientation mark. Rev. 2 | Page 2 of 13 | www.onsemi.com CSPEMI306A PIN DESCRIPTIONS PIN(s) A1 A2 A3 A4 A5 A6 B1-B3 C1 C2 C3 C4 C5 C6 NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 GND FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Device Ground Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Ordering Information PART NUMBERING INFORMATION Standard Finish Bumps 15 Lead-free Finish Ordering Part 1 Number CSPEMI306AG 2 Package CSP Ordering Part 1 Number CSPEMI306A Part Marking 306A Part Marking 306A Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Note 2: Lead-free devices are specified by using a "+" character for the top side orientation mark. Rev. 2 | Page 3 of 13 | www.onsemi.com CSPEMI306A Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Range DC Power per Resistor DC Package Power Rating RATING -65 to +150 100 600 UNITS C mW mW STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range RATING -40 to +85 UNITS C Rev. 2 | Page 4 of 13 | www.onsemi.com CSPEMI306A ELECTRICAL OPERATING CHARACTERISTICS1 SYMBOL R C TCR TCC VDIODE ILEAK VSIG PARAMETER Resistance Capacitance Temperature Coefficient of Resistance Temperature Coefficient of Capacitance Diode Voltage (reverse bias) Diode Leakage Current (reverse bias) Signal Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 Clamping Voltage during ESD Discharge MIL-STD-883 (Method 3015), 8kV Positive Transients Negative Transients Cut-off frequency ZSOURCE = 50, ZLOAD = 50 CONDITIONS MIN 80 TYP 100 30 1200 MAX 120 36 UNITS pF ppm/ C ppm/ C V At 2.5V DC 24 At 2.5V DC IDIODE=10A VDIODE=3.3V ILOAD = 10mA 5.6 -0.4 Notes 2 and 4 5.5 -300 100 nA 6.8 -0.8 9.0 -1.5 V V VESD 30 15 Notes 2,3 and 4 +10 -5 R = 100, C = 30pF 58 kV kV VCL V V MHz fC Note 1: TA=25 unless otherwise specified. C Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A1, then clamping voltage is measured at Pin C1. Note 4: Unused pins are left open. Rev. 2 | Page 5 of 13 | www.onsemi.com CSPEMI306A Performance Information Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 1. Insertion Loss VS. Frequency (A1-C1 to GND B2) Figure 2. Insertion Loss VS. Frequency (A2-C2 to GND B2) Rev. 2 | Page 6 of 13 | www.onsemi.com CSPEMI306A Performance Information (cont'd) Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 3. Insertion Loss VS. Frequency (A3-C3 to GND B2) Figure 4. Insertion Loss VS. Frequency (A4-C4 to GND B2) Rev. 2 | Page 7 of 13 | www.onsemi.com CSPEMI306A Performance Information (cont'd) Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 5. Insertion Loss VS. Frequency (A5-C5 to GND B2) Figure 6. Insertion Loss VS. Frequency (A6-C6 to GND B2) Rev. 2 | Page 8 of 13 | www.onsemi.com CSPEMI306A Performance Information (cont'd) Typical Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 7. Comparison of Filter Response Curves for CSPEMI306A VS. DC Bias Rev. 2 | Page 9 of 13 | www.onsemi.com CSPEMI306A Performance Information (cont'd) Figure 8. Filter Capacitance vs. Input Voltage over Temperature (normalized to capacitance at 2.5VDC and 25 C) Figure 9. Resistance vs. Temperature (normalized to resistance at 25C) Rev. 2 | Page 10 of 13 | www.onsemi.com CSPEMI306A Application Information PARAMETER Pad Size on PCB Pad Shape Pad Definition Solder Mask Opening Solder Stencil Thickness Solder Stencil Aperture Opening (laser cut, 5% tapered walls) Solder Flux Ratio Solder Paste Type Pad Protective Finish Tolerance -- Edge To Corner Ball Solder Ball Side Coplanarity Maximum Dwell Time Above Liquidous Maximum Soldering Temperature for Lead-free Devices using a Lead-free Solder Paste VALUE 0.240mm Round Non-Solder Mask defined pads 0.290mm Round 0.125mm - 0.150mm 0.300mm Round 50/50 by volume No Clean OSP (Entek Cu Plus 106A) +50m +20m 60 seconds 260 C N on-Solder M ask D efined Pad 0.240m D m IA. Solder Stencil Opening 0.300m D m IA. Solder Mask Opening 0.290m D m IA. Figure 8. Recommended Non-Solder Mask Defined Pad Illustration Figure 9. Lead-free (SnAgCu) Solder Ball Reflow Profile Rev. 2 | Page 11 of 13 | www.onsemi.com CSPEMI306A Mechanical Details CSP Mechanical Specifications The CSPEMI306A is offered in a custom Chip Scale Package (CSP). Dimensions are presented below. For complete information on CMD's chip scale packaging, see the California Micro Devices CSP Package Information document. PACKAGE DIMENSIONS Package Bumps Dim Millimeters Min A1 A2 B1 B2 B3 B4 C1 C2 D1 D2 Nom Max Min Custom CSP 15 B3 Inches Nom Max 2.915 2.960 3.005 0.1148 0.1165 0.1183 1.285 1.330 1.375 0.0506 0.0524 0.0541 0.495 0.500 0.505 0.0195 0.0197 0.0199 0.245 0.250 0.255 0.0096 0.0098 0.0100 0.430 0.435 0.440 0.0169 0.0171 0.0173 0.430 0.435 0.440 0.0169 0.0171 0.0173 0.180 0.230 0.280 0.0071 0.0091 0.0110 0.180 0.230 0.280 0.0071 0.0091 0.0110 0.561 0.605 0.649 0.0221 0.0238 0.0256 0.355 0.380 0.405 0.0140 0.0150 0.0160 3500 pieces 0.30 DIA. 63/37 Sn/Pb (Eutectic) or 96.8/2.6/0.6 Sn/Ag/Cu (Lead-free) SOLDER BUMPS Package Dimensions for CSPEMI306A Chip Scale Package # per tape and reel Controlling dimension: millimeters Rev. 2 | Page 12 of 13 | www.onsemi.com CSPEMI306A CSP Tape and Reel Specifications POCKET SIZE (mm) B0 X A0 X K0 3.10 X 1.45 X 0.74 PART NUMBER CSPEMI306A CHIP SIZE (mm) 2.96 X 1.33 X 0.605 TAPE WIDTH W 8mm REEL DIAMETER 178mm (7") QTY PER REEL 3500 P0 4mm P1 4mm Figure 13. Tape and Reel Mechanical Data ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION FULFILLMENT: LITERATURE FULFILLMENT Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: Phone 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: Fax 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: Email orderlit@onsemi.com Support: N. American Technical Support 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative Rev. 2 | Page 13 of 13 | www.onsemi.com |
Price & Availability of CSPEMI306A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |